Mumbai · Maharashtra
Damp and seepage inspection in Mumbai.
A trained inspector, a moisture meter and a thermal camera at your flat in Mumbai. Report on WhatsApp within 24 hours, in English, Hindi, Marathi.
On IMD normals, most rain falls between June and September, with the southwest monsoon usually setting in during June. A flat shown between November and May has usually had months to dry out and repaint.
Built here
What matters about Mumbai's buildings.
Inspectors look hardest at
- External walls and window sills on the monsoon-facing side
- Ceilings under the bathroom of the flat above
- Skirting in ground-floor flats and flats near open drains
- Freshly painted walls in resale flats shown in the dry months
- 01
Coastal humidity stays high for much of the year, so condensation and true seepage can look alike. Readings against a dry wall in the same flat help tell them apart.
- 02
Many older buildings are being redeveloped from chawls and low-rise blocks into towers. Resale flats in older buildings often have concealed plumbing and bathroom waterproofing from decades ago.
- 03
West and south-west faces take the heaviest lashing rain. Cracks in external plaster and gaps around window frames on those walls let water in sideways.
- 04
Bathrooms are stacked floor on floor, so a ceiling patch under the flat above is a common pattern in older buildings.
Areas served
Across Mumbai.
Travel within city limits is included; outside the limits we quote before you book.
- Andheri
- Bandra
- Borivali
- Chembur
- Dadar
- Ghatkopar
- Goregaon
- Kandivali
- Malad
- Mulund
- Powai
- Thane
- 1BHK
- ₹3,499
- 2BHK
- ₹4,499
- 3BHK
- ₹5,999
- 4BHK
- ₹7,999
- Independent house
- ₹7,999
- Languages
- English, Hindi, Marathi
Taking possession of a new flat in Mumbai?
Defect complaints for registered projects go to Maharashtra Real Estate Regulatory Authority (MahaRERA). Read the Maharashtra RERA defect guide
Questions from Mumbai buyers
When is the best time to inspect a flat in Mumbai?
Any time, but a dry-season visit needs instruments, because fresh paint hides last monsoon's damp. A moisture meter and thermal camera can show a wet area behind the paint, compared against a dry wall in the same flat.
Do you inspect in Thane and Navi Mumbai?
Travel within city limits is included; outside the limits we quote before you book. Share the address when you book and you will see the quote before paying.
Which RERA authority covers Mumbai?
MahaRERA. For new flats, our Maharashtra RERA page explains how to raise a defect under Section 14(3) of the RERA Act, 2016.
Find the damp before you pay for your Mumbai flat.
Book a moisture and thermal inspection. Report on WhatsApp within 24 hours.